Technical Features


The e-mark generates its own WIFI network, through which it connects to your mobile device (such as a smartphone, tablet or laptop). Imprints are transferred quickly and can be printed immediately.

Markings for exact positioning

Markings on the side of the e-mark ensure a reliable positioning on your documents, with the help of advanced sensor technology. A notch in the middle of the marking shows the center line of the imprint. It also works perfectly with COLOP labels.

Transparent window

A transparent window in the front provides a better view of the imprint during marking.

Light strip

Rotating LEDs around the e-mark indicate the current state and connectivity to your mobile device

Tricolour ink cartridge

Easily replaceable and long-lasting cartridge for high-quality full-colour imprints.


The printhead is integrated in the cartridge and visible on the bottom side of the e-mark.


The inbuilt quick-charging Li-ion battery (11.1 V) allows use of the e-mark for several hours (around 5 hours continuous marking) without power supply. It can be fully charged within 3 hours (0 - 100 %).

Docking station

The docking station serves for quick charging of the battery and helps prevent the printhead from drying out.

Protection cap

Is integrated in the docking station and optimally protects the printhead against drying-out. The e-mark should always be put in the docking station with its integrated protecting cap.

Sliding wheels

Move gently from left to right or the other way round to make an imprint, supported by sliding wheels.


An optical sensor provides speed control for the best and most reliable imprint results.


Connect the e-mark with your computer via a Micro-USB cable. Note that charging can only be done with the power cable.

ON/OFF switch

Switch on the e-mark through an opening on the bottom of the docking station to avoid drying-out of the printhead.


4 contact pins provide a connection between the e-mark and docking station for charging.

Protective cover

Can be easily opened to change a cartridge via a small notch on the bottom of the cover.